30MPA 4500PSI High Pressure Air Compressor Pump 110V Electric PCP Air Compressor Pump PCP Inflator Air Pump (Normal Version)

Specifications: Power supply:110V,60Hz Power: 1.8KW Rotating speed:2800r/min Working pressure:0-30Mpa/0-300bar/0-4500psi Lubricating system:splash type Compress mode:two-stage compression Cooling mode:water cooling Weight:15.8KG Size: 300*215*350cm Noise:85db Operation Instruction: 1、Take out the product; install the hose at the air outlet.(Note: gasket is needed, or air leakage might exist). 2、Connect 2 cold water pipes and connect them to the water pump. Note: the lower pipe connected to the water pump is water inlet; sinking pump is used in this product. The water pump should be immersed in water for using. 3、Install the pressure relief valve screw; pressure relief valve screw is installed at the pressure relief hole under the hose. The blow-down valve is installed at the drain outlet of the first air chamber block. 4、Immerse the water pump in water and switch on the power. 5、Connect the container need to be inflated, make sure the connection is correct. 6、Screw up the screws of the blow-down valve and pressure relief valve. 7、Switch on the power ant the machine operates. (Note: when the machine is operating, the water must operate correspondingly, or the product might be damaged due to overheated, personal harm may even occur) . 8、After the inflation is completed, screw of the pressure relief valve should be firstly loosen, then the power is to be switched off, by doing so, high pressure air backlash caused due to sudden failure of power supply would be avoided, which could lengthen lifetime of the product, as well as discharge high pressure air in the machine. Packing List: 1X main machine 1x water pump 2x pressure relief screw 1x breath nozzle 1x water pipe 4x explosion-proof disc 5x filter element 1x set of O-rings 1x fl

• ★【Reliable Design】This product uses a superimposed two-cylinder two-stage compression design, which has the characteristics of large displacement and fast inflation. It can be used not only for diving fire cylinders, but also for cars, trucks, trucks, etc.
• ★【Features】You could freely set the required pressure through the pressure plate. When the pressure reaches the set value, it will automatically stop. This function can save you time and increase the service life of the machine.
• ★【Stable Operation】Every product has been tested and delivered, electric inflatable, saving time and effort.
• ★【High Quality】Pure copper motor, long service life. Complete functions.
• ★【Multi-Purpose】The electric air pump is designed for pressurized air in the tank, suitable for fire fighting, color bombs, leak detection, pressure testing, automobiles, air tightness testing, etc.; it can be used as long as high pressure is applied.